Getting To Know The Machine; Description Of The Machine And Planned Use; Intended Use; Improper Use - Stiga MP 900 Li 48 Manual De Instrucciones

• A certain amount of chain lubricating oil is
released into the environment when the
machine is running, so only use biodegradable
oils made specifically for this use. Use of a
mineral oil or motor oil causes serious damage
to the environment.
• Comply with local regulations for the disposal of
packaging, deteriorated parts or any elements
with a strong environmental impact; this waste
must not be disposed of as normal waste, it
must be separated and taken to specified waste
disposal centres where the material will be
recycled.
• Comply with local regulations for the disposal of
waste materials
• When the machine is withdrawn from service,
do not dispose of it in the environment, but take
it to a waste disposal facility in accordance with
the local regulations in force.
Do not throw electrical equipment away
with domestic waste. According to the
European
electrical and electronic equipment waste
and its implementation,
Regulation "The waste electrical and electronic
equipment regulations 2013 (as amended)" and
according to national regulations, old electrical
equipment must be collected separately, for eco-
compatible recycling. If electrical equipment is
disposed of in landfills or in the ground, hazardous
substances can leak into the groundwater and
contaminate the food chain, damaging your health
and well-being. For further information on the
disposal of this product, contact your dealer or a
domestic waste collection service.
At the end of their working life, dispose of
batteries paying due attention to the
environment. Batteries contain material
classified as hazardous for you and the
environment. They must be removed and
disposed of separately at a facility that accepts
lithium-ion batteries.
Separate waste collection of the products
and packaging used allows the materials
to be recycled and reused. Reuse of
recycled materials help to prevent
environmental pollution and reduces the
demand for raw materials.
Directive 2012/19/EU
according to UK

3. GETTING TO KNOW THE MACHINE

3.1 DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is a forestry tool and
precisely a battery powered chain pruner.
The machine is essentially composed of a battery
powered motor and a guide bar that that takes the
power from the battery to the motor which drives
the cutting chain.
The operator is able to operate the machine with
two hands, using the front and rear hand grips,
and can use the main controls, always remaining
at a safe distance from the cutting means.

3.1.1 Intended use

This machine was designed and manufactured
on
for:
– delimbing trees with dimensions suitable for
the length of the guide bar or wooden objects
with the same characteristics;
– used by one operator.

3.1.2 Improper use

Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm
persons and/or damage things. Examples of
improper use may include, but are not limited to:
– trimming hedges;
– carving operations;
– sectioning pallets, crates and various packing
materials;
– sectioning furniture or other materials with
nails, screws or other metal components;
– butchering meat;
– using the machine to cut materials other than
wood (plastic materials, building materials);
– using the machine to lift, move or split objects;
– using the machine while fastened to fixed
supports;
– using cutting means other than those found in
the "Technical Data" table
injury and wound hazard;
– use of the machine by more than one person.
NOTE
Improper use of the machine will invalidate the
warranty, relieve the Manufacturer from all liability,
and the user will consequently be liable for all
and any damage or injury to himself or others.
EN - 6
(sheet ii). Serious