BRENNTAG HEATSAVR Manual De Instalación página 7

4.1 PROGRAMMING
A program is a specific dosing event. To program the system the right-hand switch must be ON ( l ).
The Programming menu can be accessed by pressing the Prog key for at least 3 seconds.
If a password other than 0 is set, the system will ask for the password to access the programming menu.
Upon release of the keys the display will show:
P01
-------
P01
-------
P01
-------
P01
-------
P01
Durat.
Standard view
During normal operation (the right-hand switch is on the " I "), the display will show the dosing quantity which will
decrease slowly until it finishes of the related program.
4.2 Menu exit
To exit from the setting or programming Menu, press the Esc key, and the system will display:
Exit
H E A TS A V R
Display
on 12.00am
Q 0ml
on 12.00am
Q 0ml
on 12.00am
Q 0ml
on 12.00am
Q 0ml
Speed 100%
00:00:00
Wed
PROG 1 Q
Display
Save
C od e 0000137248
st
1 Number of program - You can set 48 different
programs. Select the program number, you want start
to setup by pressing UP and DOWN keys. To confirm
press Enter.
nd
2 Set startup time - The dosing start time can be
set by using UP and DOWN keys, to confirm press
Enter.
rd
3 Weekly days – Use UP and DOWN to choose
which weekly day or group of days you want the
program running as below:
1.
2. M
3. _T
4. W
5. T
6. F = ON - on Friday
7. _S_ = ON - on Saturday
8. S
9. MTWTF = ON - from Monday to Friday
10. SS = ON - Saturday & Sunday
11. MTWTFS_ = ON - from Monday to Saturday
12. MTWTFSS = ON - every days
Press Enter to confirm.
th
4 Quantity - Use UP and DOWN keys to set the
desired quantity, to confirm press Enter
The maximum quantity which can be set is 18 l or
600 oz.
*remember to setup the measure unit of the
system.
th
5 Pump speed - Use UP and DOWN keys to
choose the pump speed expressed as a percentage
(from 1 to 100%) which automatically fixes the
duration of the dosing itself.
The bottom right part of the display shows the time
necessary for dosing at that given speed.
To confirm press Enter.
02.27pm 60%
846ml
Use UP and DOWN to save or not. Press Enter to
confirm.
*You can exit anytime. If you set just one parameter it
is not required to go through each submenu.
Settings
= OFF - all days
= ON - on Monday
= ON - on Tuesday
= ON - on Wednesday
= ON - on Thursday
= ON - on Sunday
Settings
rev . 1 . 0 6