8.9.3
Scheduled dispensing group wash
If provided, the machine automatically requests that the dis-
pensing groups be washed on a daily basis.
To begin the wash cycle, proceed as shown on the display.
HOWEVER you can also cancel the wash prompt and resume
normal operation.
Arbitrary dispensing group wash
8.9.4
During the washing phase, all the coffee selections
of that group are disabled.
Washes are interrupted if the machine is switched
off; to resume the washes automatically, turn the machine
on again.
If desired, it is possible to wash the groups at any time, pro-
ceeding as follows:
• Select the
button.
• Press the menu button
• Select the configuration button
• Press the
Washes
• The display will indicate the date of the last wash cycle
and the number of wash cycles.
• To start the wash, press the
• Insert a suitable detergent in the blind filter holder, secure
it to the dispensing group and press the
• Wait for wash cycle to finish, then remove the filter holder
from the dispensing group and press the
• When the rinse cycle has finished, remove the filter holder
from the dispensing group and press the
If it has been programmed, it is possible to per-
form a brief rinsing of the group (about 3 seconds)
by pressing the manual button or the START/STOP
button on the display.
If a certain number of cycles has been programmed
and such number is exceeded, the "Perform group
wash now?" message appears on the display. Pro-
ceed with washing following the instructions on the display.
60
216
of
.
.
button.
button.
Perform wash
Start
Start
End
button.
button.
button.
Groups
Date of last wash
Number of wash cycles
Wash in progress
Rinse in progress
USER MENU
Programme
Beverage
graph
doses
Time and date
Washes
Screensaver
Counters
WASHES
Insert the blind
filter with the
cleaner
Perform a wash
Start
WASHES
End of wash.
Remove the blind
filter holder.
Start
WASHES
Wash
Completed
End
Parameters
Blend
selection
Water filters
WASHES
WASHES
WASHES
USER Manual