Installation Site And Training Area; Assembly - SPORTSTECH BRT600 Manual De Usuario

INSTALLATION SITE AND TRAINING AREA

The training area should be at least 2.6 m. The free space should be at least 0.6 m larger than the
training area in the direction in which the equipment is accessed. The free area must also be sufficient to
allow for the area needed for an emergency descent. If two devices are next to each other, the free area
can be considered a shared area between them.
0,6 m freie
0.6 m free
Fläche
area
Before assembly:
Check that all parts and tools itemized in the spare parts list are present.
Note: Some of the smaller parts may already be preassembled for the larger parts. Please check this
carefully! Please avail yourself of a suitable wrench if you want to assenble the device.
• Keep children and animals away from the mounting surface. Swallowing small parts can cause
suffocation.
• Make sure that you have enough space to lay out all the parts before beginning the assembly.
• Assemble the device as close as possible to its final position (in the same room).
• The product must be set up on a stable and level surface.
• Dispose of the packaging carefully and responsibly.
0.6 m free
area
0.6 m free
area

ASSEMBLY

31
0.6 m free
area
2.6 m trai-
ning area
EN