2 Warning messages
If for any reason the task was not completed normally after a command was received from the controller, the DN-V750/V755 sends
the controller an error code. The error code consists of an [E] followed by a 2-digit error number.
In the native mode, the [PLAY] and [STOP] LEDs on the front panel flash. If you want detailed information on the error after an error
command is sent, it is possible to receive confirmation of the warning message using the [?E] serial command. Detailed information
on the latest error can be acquired. Performing this confirmation stops the LEDs from flashing, setting the display back to normal. The
LEDs also stop flashing if error message confirmation is performed with the on-screen display (OSD) first.
Error code
E00
Overflow
(
LD compatible mode only)
E04
Feature not available
E06
Missing argument
E99
Panic
E12
Search error
(
LD compatible mode only)
In the Native Mode
2 Command reference
• Commands are combinations of two ASCII code characters.
• Arguments are only valid when placed in front of the command and when they consist of numerals or of character strings enclosed
in quotation marks ("").
• [n] on the list of commands refers to numerals, ["s"] to character strings.
• Commands may consist of either capital or small letters, but a single command must not contain both capital and small letters.
• (a) through (e) on the right of the table below refer to the conditions described below. The [C C ] mark indicates that the command can
be issued.
(a) Issuing in the stop mode
(b) Issuing during file playback
(c) Issuing in the still and pause modes
(d) Issuing during script playback
(e) Issuing as FTP [SITE] command
Name
Command buffer overflow.
An attempt has been made to execute a function that is not available.
The command's instruction section is not correct.
Cannot be used in the current mode.
Parameter is not within prescribed range.
Necessary parameter has not been specified.
Parameter value is not appropriate.
Irrecoverable error has occurred.
Flash memory card (DN-V750) or Hard disc drive (DN-V755) cannot be accessed.
Playback could not be continued and has stopped.
Search or stop marker address cannot be found.
Description
ENGLISH
21