Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
The DN-V750/V755 is equipped with an internal clock. Set the clock before using the DN-V750/V755.
The clock can be set either by using the controls on the DN-V750/V755 or by serial control in native mode. For instructions on serial
control, see the "11 SERIAL REMOTE".
2 Setting the date and time using the controls on the DN-V750/V755
At the settings menu screen, press the "PLAY/PAUSE" button to display the date and time setting screen.
1
TIME SET MODE
2001/07/30-16:58:05
2001/07/30-16:45:28
SET
CANCEL
2
3
4
5
6
TIME SET FINISHED
2001/07/30 16:58:05
Please switch operation mode
and push
7
2 Quick Set
When the "PLAY/PAUSE" button is pressed while pressing in the "SELECT" button step 1 in the previous section, the seconds are
reset to 0 for the current minute when between 0 and 29 seconds, or to 0 for the next minute when between 30 and 59 seconds.
14
[ STOP ] for reboot
At the configuration menu, press the "PLAY/PAUSE" button.
The following appears on the external monitor:
"TIME SET MODE"
"yyyy/mm/dd-hh:mm:ss" (current date/time)
"yyyy/mm/dd-hh:mm:ss" (set date/time)
"yyyy" flashes.
Use the "PLAY/PAUSE" and "STOP" buttons to set the year (Gregorian
calendar).
Press the "SELECT" button to move to the month's place.
Repeat steps 3 and 4 to set the date and time.
Once the date and time have been set, press the "SELECT" button so that
"SET" flashes, then press the "PLAY/PAUSE" button. "TIME SET OK" is
displayed, indicating that the setting is completed.
* To
cancel
the
setting,
"CANCEL"flashes, then press the "PLAY/PAUSE" button.
"TIME SET FINISHED" is displayed. When this is displayed, press the
"STOP"button to reboot the DN-V750/V755. Set the operating mode in which
you want the DN-V750/V755 to start using the MODE selector switches on the
rear panel to start the DN-V750/V755 in that mode.
press
the
"SELECT"
button
so
that
Tabla de contenido
