Tabla de contenido
Idiomas disponibles
Idiomas disponibles
iNSTallaTiON
installation
f Drill the holes and secure the wall mounting bracket with
f
2 screws and 2 rawl plugs (screws and rawl plugs are not
part of the standard delivery).
f Fit the threaded stud provided.
f
f Fit the wall mounting bracket.
f
Fitting the cable grommet
f Fit the cable grommet. For connecting cables > 6 mm², en-
f
large the hole in the cable grommet.
Making the water connection
Material losses
!
Carry out all water connection and installation work in
accordance with regulations.
f Seal and insert the twin connectors.
f
Material losses
!
Never use the shut-off valve in the cold water inlet to
reduce the flow rate.
www.stiebel-eltron.com
Preparing the back panel
Material losses
!
If you break open the wrong knock-out in the back panel
by mistake, you must use a new back panel.
f Break out the cable grommet knock-out in the back panel.
f
Deburr any sharp edges with a file if necessary.
Installing the appliance
3
L3'
4
L2'
1
L1'
2
f Push the back panel over the threaded stud and the cable
f
grommet. Pull the cable grommet by the locking hooks into
the back panel using pliers, until both locking hooks audibly
click into place.
f Remove the protective transport plugs from the water
f
connections.
f Press the back panel firmly into place and lock the fixing tog-
f
gle by turning it clockwise through 90°.
PEG |
7
Tabla de contenido
Solución de problemas
