Technical Characteristics; Technical Characteristics Of The Connect Crp; Power Supply Technical Characteristics; The Connect Crp Device - Ferroli Connect CRP Manual De Instalacion Y Uso

3.3

TECHNICAL CHARACTERISTICS

3.3.1

Technical characteristics of the Connect CRP

Dimensions (LxWxH)
Protection rating
Power supply
Relay
Adjustment range
Temperature sensor
WIFI module
RF module
Operating conditions
Standards
3.3.2

Power supply technical characteristics

Input voltage
Output voltage

4. THE CONNECT CRP DEVICE

4.1

DESCRIPTION OF BUTTONS

Symbol Function
Select/Confirm button
Exit or return to previous menu
Move the selection between the various menus
Increase or decrease the selected parameter value
4.2

FIRST CONFIGURATION

NOTE BEFORE CONFIGURING THE Connect CRP DEVICE, DISABLE THE UNIT'S CLIMATIC CURVES
TO AVOID INCORRECT FUNCTIONING OF THE CURVES MANAGED BY THE Connect CRP
When the device is switched on for the first time, or following a reset to the factory values via the TECHNICAL menu,
a guided procedure for configuring the system is proposed.
However, all the selections made can also be changed at a later time by accessing the relevant menus.
133 mm x 95.5 mm x 26.5 mm
IP 40
24Vdc ± 5%; max 2W
SPST-NO (normally open and voltage-free contact)
Maximum capacity: 5A 250Vac / 5A 30Vdc
Heating
Cooling
DHW
Internal sensor with accuracy < 1.0 °C
Display resolution 0.1°C
2.4GHz frequency, 802.11 b/g/n protocol
868MHz frequency, 2-GFSK modulation
Operating temperature 0÷50 °C, Max. relative air humidity 70 % @ 50°C (non-condensing), Storage
temperature -20 ÷70 °C
2014/35/EU Low voltage directive (LVD)
2014/30/EU Electromagnetic compatibility directive (EMC)
2014/53/EU Radio Equipment Directive (RED)
220-240 Vac, 44 mA, 50-60Hz
24 Vdc, 180 mA, 4.2 W
cod. 3542B380 - Rev 00 - 05/2022
5°C – 30°C
5°C – 30°C
30°C – 60°C
81
EN