Maintenance Schedule - Husqvarna FS 600 E Manual De Usuario

Ocultar thumbs Ver también para FS 600 E:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92

Maintenance schedule

Maintenance
Clean the external surfaces of the product with water. Refer to
page 22 .
Do a general inspection. Refer to
Do a check of the drive belt. If it is necessary, adjust the tension of the drive belt. Refer to
To adjust the tension of the drive belt on page 23 .
Do a check of the machine stop button. Refer to
on page 10 .
Do a check of the ON button and OFF button. Refer to
and OFF button on page 9 .
Do a check of the water flow. If the water flow is not sufficient, do a check of the water
filter. If it is necessary, clean the water filter. Refer to
22 .
Do a check of the blade guards. Refer to
Do a check of the cutting blade. Refer to
Lubricate the bushings and the lever for cutting depth adjustment. Refer to
the product on page 23 .
Lubricate the nut at the drive belt plate and the axle. Refer to
page 23 .
To clean the product
WARNING:
When you clean the product, dirt and
harmful material can eject from the product.
CAUTION:
decreases the performance of the product
and can cause the motor to become too hot.
Let the product become cool before you clean it.
Do not clean electrical components with water.
Use a weak cleaning agent. Put on protective gloves
to prevent skin irritation.
Always clean all the equipment at the end of the
work day. Do not use a high-pressure washer to
clean the product.
Remove blockage from all air openings.
To clean the water filter
CAUTION:
decreases the water flow to the cutting blade
and can cause the cutting blade to become
too hot.
22
To do a general inspection on page 23 .
To do a check of the machine stop button
To do a check of the blade guard on page 10 .
Cutting blades on page 11 .
Use protective glasses.
A blocked air intake
A blocked water filter
To clean the product on
To do a check of the ON button
To clean the water filter on page
To lubricate
To lubricate the product on
1. Disconnect the external hose (A) from the water
inlet.
2. Remove the water filter (B) with a flat screwdriver.
Daily
X
X
X
X
X
X
X
X
X
A
1620 - 003 - 28.02.2022
Monthly
X
B
Tabla de contenido

Solución de problemas

loading

Tabla de contenido