Hitachi CP-AW2519N Manual De Usuario página 227

Connection to the ports
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
►Only the signal that is input from the COMPUTER IN1 or IN2 can be output
from the MONITOR OUT port.
A COMPUTER IN1,
D-sub 15pin mini shrink jack
(1) for PC signal
• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. Signal: TTL level (positive/negative)
• Composite sync. Signal: TTL level
Pin
1
Video Red
2 Video Green
3 Video Blue
4 (No connection)
5 Ground
6 Ground Red
7 Ground Green
8 Ground Blue
9 (No connection)
(2) for Component signal
• Y : Component video Y with composite sync, 1.0±0.1 Vp-p, 75 Ω terminator
• Cr/Pr : Component video Cr/Pr, 0.7±0.1 Vp-p, 75 Ω terminator
• Cb/Pb : Component video Cb/Pb, 0.7±0.1 Vp-p, 75 Ω terminator
System:480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50/60,1080p@50/60
Pin
1
Cr/Pr
2 Y
3 Cb/Pb
4 (No connection)
5 Ground
6 Ground Cr/Pr
7 Ground Y
8 Ground Cb/Pb
USB TYPE B
USB
TYPE A
DC5V
0.5A
LAN
MONITOR OUT
CONTROL
COMPUTER IN2,
B
Signal
Signal
B
COMPUTER IN2
HDMI
MIC
AUDIO IN1 AUDIO IN3
C
R
L
AUDIO IN2
MONITOR OUT
C
Pin
10 Ground
11 (No connection)
A
: SDA (DDC data)
12
,
B C
: (No connection)
13 H. sync / Composite sync.
14 V. sync.
A
: SCL (DDC clock)
15
B ,
C : (No connection)
-
Pin
9 (No connection)
10 Ground
11 (No connection)
12 (No connection)
13 (No connection)
14 (No connection)
15 (No connection)
-
3
Connection to the ports
A
COMPUTER IN1
S-VIDEO
AUDIO OUT
R
L
VIDEO
Signal
-
Signal
-