Proper use
The machine is designed for generating
steam and vacuum cleaning liquids and sol-
id substances according to the description in
this Operating Instructions Manual.
The manufacturer is not responsible for any
damages that may occur on account of im-
proper use or wrong operations.
Unpacking the Appliance
When you unpack the system, check that
everything is complete (see page 3).
If there are any missing parts or you detect
any transport damage when unpacking,
please inform your dealer immediately.
Environmental protection
The packaging material can be re-
cycled. Please do not place the
packaging into the ordinary refuse
for disposal, but arrange for the
proper recycling.
Old appliances contain valuable
materials that can be recycled.
Please arrange for the proper recy-
cling of old appliances. Please dis-
pose of your old appliances using
appropriate collection systems.
Warranty
The terms of the guarantee applicable in
each country have been published by our re-
spective national distributors. We will fix
possible faults on your unit free of charge
within the warranty period, insofar as the
faults are caused by material defects or de-
fective workmanship. Guarantee claims
should be addressed to your dealer or the
nearest authorized customer service centre,
and supported by documentary evidence of
purchase.
All manuals and user guides at all-guides.com
" Open the filling nozzle (7) of the water
" Fill approx. 0.5 litre water into the water
" Close the filling nozzle of the water res-
Note:Water is automatically supplied from
the water reservoir to the steam boiler. The
water reservoir must be filled up twice before
commissioning the machine for the first time.
" Lift the handle (18) of the water filter con-
" Turn the handle (18) of the water filter
" Fill the water filter container (17) with tap
" Add a cap full of foam stop to the water
Note: The functioning of the vacuum cleaner
is based on the whirling of the suction air in
the water filter. In the process, sucked-in
materials and deposits of cleaning agents
from floors get collected in the water bath.
This can sometimes lead to the formation of
foam. It is necessary to add the foam stop
liquid to the water filter bath to avoid this sit-
uation. The foam stop liquid is environment-
friednly and fully bio-degradable. Slight
foam formation is normal and does not ham-
per the functioning of the machine.
" Insert the water filter inlay (19) back into
Preparing the Appliance
Filling the Water Reservoir
tank (Fig. 1).
tank.
Note: You can use normal tap water. As
water naturally contains calcium that can
lead to the formation of deposits in the
boiler, we recommend the use of a mix-
ture consisting of 50% tap water and
50% distilled water.
ervoir (7).
Filling the water filter container
tainer (Fig. 2) and remove the water filter
container (17) (Fig. 3).
container and remove the water filter in-
lay (19) (Fig. 4).
water till the water level marking MAX
H
O is covered (Fig. 5).
2
filter container.
the water container (17).
17
English