How To Use; Main Control - clage FX Next Instrucciones De Uso E Instalación

7. How to use

Main control

The e-paper display changes automatically to main screen approx . 15
seconds after activation or operation .
Tab the sensor keys to select user profiles or applications or change the
temperature .
Display informations (fig. B1)
Pos. Function
1 Status display, top
2 User
3 Menu button
4 Temperature display
5 Battery status
6 Status display, bottom
7 Applications
8 Sensor keys
Temperature display
The scale ring fills up as the temperature setting is increased . When
water is flowing, the ring shows the power consumption . In addition, the
target temperature is displayed in °C in the middle of the display .
Temperature setting
The desired temperature can be selected via the two middle sensor keys
within a range of 20 °C to 60 °C . Tapping once changes the temperature
by 1 °C, in the comfort range between 35 and 43 °C by 0 . 5 °C . If the tem-
perature is set below 20 °C, the symbol
display and the appliance switches off the heating function .
User selection
The user profiles can be selected by tapping on the left sensor key and
than tap the key under the profile picture (to adapt profile, see section
"User") (fig . B2) .
Applications
Preset applications can be selected here out of two different usage pro-
files for kitchen and bathroom (to change the usage profiles, see section
"Settings") . Simply tap on the right sensor key to open the selection (fig .
B3) . Tap on the sensor key under an application symbol to activate it .
The applications are factory-set to the following temperature values
depending on the usage profile:
15
appears in the temperature
EN