Replacing The Thread Catchers; Cleaning And Care - Miele Classic C1 SBAN0 Instrucciones Operativas

en-US
You must also activate the
TimeStrip® exhaust filter change in-
dicator.
2. If you wish to replace exhaust filter b
or c with exhaust filter a, it is essen-
tial that you also install the filter grille*
(Fig. 26).
* Filter grille – see "Optional acces-
sories"

Replacing the thread catchers

(Figs. 28 + 29)
(only possible for models with an ad-
justable floorhead included as standard)
The thread catchers on the suction inlet
to the floorhead can be replaced. Re-
place the thread catchers if the pile has
worn down.
 Lift the thread catchers from the
slots. To do so use a suitable tool,
e.g., a flat-head screwdriver.
 Install new thread catchers.
Replacement parts are available from
your Miele dealer or through Miele
Service.
22

Cleaning and care

Risk of electric shock from volt-

age.
The supply voltage is applied to the
appliance even if it is switched off.
Before cleaning, unplug the appli-
ance from the electrical socket.
Vacuum cleaner and accessories
Risk of electric shock from volt-

age.
If moisture gets into the vacuum
cleaner, there is a risk of electric
shock.
Do not let the vacuum cleaner get
wet.
The vacuum cleaner and all plastic ac-
cessories can be cleaned with a com-
mercially available cleaner suitable for
plastic.
Damage due to unsuitable clean-

ing agents.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discolor
the external surfaces.
Do not use abrasive cleaning agents,
glass cleaning agents, all-purpose
cleaners, or oil-based conditioning
agents.
Dust compartment
The dust compartment can, if neces-
sary, be cleaned using a dry duster,
brush or, if available, a second vacuum
cleaner to vacuum the dust out.