Using The Accessories Supplied - Miele Classic C1 SBAN0 Instrucciones Operativas

en-US
Miele offers a range of other floorheads,
brushes, and accessories for other
types of
flooring and special applications (see
"Optional accessories").
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
 Clean even hard floors which are not
susceptible to scratching, as well as
flooring with gaps or deep crevices
in it, with the brush protruding:
 Press the foot switch .
Vacuum carpets and rugs with the
brush retracted:
 Press the foot switch .
Activating the TimeStrip® exhaust fil-
ter change indicator on the exhaust
filter
Depending on the model, your vacuum
cleaner will be equipped as standard
with one of the following exhaust filters
(Fig. 07):
a AirClean
b Active AirClean 30 (black)
c HEPA AirClean 30 (white)
If your vacuum cleaner is equipped with
exhaust filter b or c, you need to acti-
vate the TimeStrip® exhaust filter
change indicator.
 Pull the release button for the dust
compartment lid upwards and open
the lid as far as it will go (Fig. 08).
 Remove the indicator strip (Fig. 09).
16
 Press the TimeStrip® exhaust filter
change indicator (Fig. 10).
After approx. 10–15 seconds a thin red
line will appear in the left-hand side of
the display (Fig. 11).
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the Fil-
terBag when doing so.
The TimeStrip® exhaust filter change
indicator shows the remaining func-
tional life of the exhaust filter. After ap-
prox. 50 operating hours the display
will be completely filled with red (Fig.
12). 50 operating hours equates to ap-
proximately one year of use.

Using the accessories supplied

(Figs. 13 + 14)
 Dusting brush
 Upholstery nozzle
 Crevice nozzle
 Accessory holder for the three ac-
cessories supplied
Symbols on the holder show where to
attach the different accessories.
 Attach the accessories holder to the
hose connector socket at the top or
bottom of the suction hose. Make
sure it clicks into position.
Adjustable floorhead (Fig. 15)
The adjustable floorhead can also be
used for vacuuming the stairs.