Cleaning The Heater - HTW CON2000 Manual De Usuario E Instalacion

slowly anti-clockwise until the thermostat is heard to click off and the lights on the elements
switches are seen to go out. After this the heater will keep the air temperature in the room at the
set temperature by switching on and off automatically.
Convector heater with thermostat and fan HTW-CON2000PLUS
All the above instructions for model HTW-CON2000BASIC (above) also apply to model
HTW-CON2000PLUS.
Model HTW-CON2000PLUS also incorporates an internal fan, which can be switched on
independent of the heating elements.
Fan Operation: This is operated by means of the switch with the fan symbol alongside it. The fan
will only operate with the thermostat in the "on" position and can be used when the heating
elements are "on" to blow warm air into the room.
In warm conditions the fan can be used with the heating elements "off" to blow cool air into the
room.

CLEANING THE HEATER

Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
3