Technical Characteristics - HTW CON2000 Manual De Usuario E Instalacion

TECHNICAL CHARACTERISTICS

MODEL: HTW-CON2000 SERIES
Models covered by this instruction sheet：
Stand convector heater with thermostat
HTW-CON2000BASIC
HTW-CON2000PLUS
RATED POWER INPUT: 2000W
RATED VOLTAGE RANGE: AC220-240V 50Hz
IMPORTANT Read these instructions fully before using the heater. Retain these instructions for
future reference.
ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied separately in the cartoon) must be fitted to the unit.
These are to be attached to the base of the heater using the 4 self-tapping screws provided,
taking care to ensure that they are located correctly in the bottom ends of the heater side
moldings.
SAFETY INSTRUCTIONS (to be read before operating the heater)
1. Do not use the heater unless the feet are correctly attached.
2. Ensure the power supply to the socket into which the heater is plugged is in accordance with
the rating label on the heater and that the socket is earthed.
3. Keep the power cord away from the hot body of the heater.
4. Warning：Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
1