CYBEX SENSORSAFE Manual De Instrucciones página 7

Approved for:
Cybex Cloud Z Line
Cybex Aton M i-Size
Cybex Aton B Line
Dear customer, thank you for purchasing a
SENSORSAFE clip. This product is manufactured
under special quality surveillance and complies with the
strictest safety requirements.
IMPORTANT INFORMATION
•
The following short instruction is intended to provide
only an overview. To achieve maximum security and
comfort for your child it is imperative that you read
the entire user guide of the car seat carefully.
•
SENSORSAFE cannot be used with seats other
than the ones listed. Application on other products
can lead to serious danger for your child.
•
It is essential to use and install SENSORSAFE per
the instructions provided in this manual. In particular,
pay attention to the correct positioning of the clip!
•
SENSORSAFE is a monitoring system attached
to the car seat and connected to your smartphone
via Bluetooth (Bluetooth class 2). It will alert you of
unsafe situations for the child. The system consists
of the following two components:
1. Smart Chest Clip: e.g. measurement of ambient
temperature, state of an open or closed clip.
2. Smartphone: SENSORSAFE only works with the
SENSORSAFE application, which is available in the
Apple App Store or Google Play Store (1).
•
Even when used properly and in accordance with
its intended purpose SENSORSAFE serves only
as a supplementary safety support system. The
functionality depends on several factors and cannot
be guaranteed. The ultimate responsibility for the
safety of a child resides with the child's parents
or caregivers. SENSORSAFE does not represent
any event to circumvent, mitigate nor represent a
substitution for parental legal duties.
•
WARNING! Full function of SENSORSAFE is based
on communication to the smartphone. Please take it
with you every time and activate all functions of the
smartphone needed for SENSORSAFE.
•
WARNING! Never leave your child unattended in
the car.
•
Keep plastic packaging material out of your child's
reach: danger of suffocation!
•
Used electronic devices do not belong in household
garbage.
��
Please always have the instruction manual at hand
close to the car seat.
INSTALLATION AND DEINSTALLATION
The SENSORSAFE clip needs to be attached to the
harness system of the seat. Both parts of the clip have
slots for connecting it to the harness system.
For installation of both parts please proceed as follows:
• Grasp the harness under the shoulder pads and
guide it from back to front through the upper slot of
the clip (2).
• Guide the harness behind the clip and insert it from
back to front in the lower slot.
Make sure the harness straightly runs through both
��
slots and is not twisted (3). To uninstall the clip, push
the harness together and guide it out of the slots.
RESTRAINING THE CHILD WITH HARNESS
AND CLIP
Adjust the seat according to the instructions in the user
guide of the seat. Restrain your child as described in the
user guide of the seat (see chapter: "STRAPPING WITH
HARNESS SYSTEM"). After closing the belt buckle
please proceed with the following additional steps:
• Close the clip with an audible CLICK (4).
• Push the closed clip down first – towards the buckle.
• Pull cautiously on central adjustment belt in order
to tighten shoulder belts until they fit your child's
body (5).
• Position the clip directly beneath the shoulder
pads (6).
Please make sure the harness system is tightened
��
and not twisted. To open the clip please press the
button in the middle and pull both parts apart (7).
SENSORSAFE APP
Download and setup
The SENSORSAFE App can be downloaded in the
Apple App Store or Google Play Store for free. To use
the SENSORSAFE clip connected to the SENSORSAFE
App please ensure that:
• the app is installed on your smartphone.
• Bluetooth is turned on.
• the clip is buckled and your smartphone is
connected to it.
• the SENSORSAFE App is given permission to send
notifications and volume is turned on (Do Not Disturb
is disabled).
Before first use
Before using SENSORSAFE for the first time, the clip
must be registered to your smartphone account. In the
future the system will awake automatically, when the clip
is closed and Bluetooth is activated on your smartphone
as long as the app is running in the background and not
closed on your phone.
For connecting, proceed as follows:
1. Pull the battery pull tag from the SENSORSAFE
chest clip and discard it (8).
2. Activate Bluetooth on your smartphone, open
the SENSORSAFE application and follow the
instructions for registration. Close the clip. An LED
will light up when the clip starts to send information
and will turn blue when successfully connected to
the application. Now you can see the SensorSafe
clip in the list of devices on the SensorSafe mobile
app.
3. Test out the SensorSafe system alerts prior to using
it with a child to familiarize yourself with how the
safety notifications are triggered.
EN EN
5