V2 CITY4-EVO Manual De Instrucciones página 51

PARAMETER VALUE
Ch.tr
no
0.5" - 20.0'
PA.tr
no
Si
LUCi
no
t.LUC
CiCL
AUS
Mon
biSt
tiM
toUt
SPiA
no
W.L.
FLSh
LP.PA
no
Si
DESCRIPTION
Closing after transit
This function allows having a fast closing as soon as transit through
the gate is completed, therefore, a time shorter than
generally used
Function deactivated. The gate closes after the time set for the
Ch.AU
function
The gate closes after the setup time
Pause after transit
In order to let the gate open for the shortest possible time, it is
possible to stop the gate once the passage before the photocells is
detected.
If the automatic working is enabled, the time of the pause is
Function deactivated
Function activated
Courtesy lights
This menu allows you to set operation of the courtesy lights in
automatic mode during gate operating cycle.
Function disabled
Operation timed (from 0.0" to 20'0)
Lights on for the entire duration of the cycle
Auxiliary Channel
This menu allows you to set relay operation for courtesy lights using a
remote control saved on channel 4 of the receiver
Mono-stable operation
Bi-stable operation
Timed operation (time set from 0 to 20'0)
Bistable + timed operation (time set from 0 to 20'0)
Low voltage lights
This menu allows setting the operation of the low voltage lights
output
Function deactivated
Indicator light operation: Indicates the status of the gate in real-time.
The type of blinking indicates the four possible conditions:
- GATE STOPPED: Light off
- GATE IN PAUSE: the light is on, fixed
- GATE OPENING: the light blinks slowly (2 Hz)
- GATE CLOSING: the light blinks quickly (4 Hz)
Flashing light operation (fixed frequency)
Flashing light during pause time
Function deactivated
Flashing light will be on during the pause time too
Ch.AU
- 49 -
AntE SCor
no no
is
no no
Ch.tr
.
t.LUC t.LUC
1'00 1'00
Mon Mon
no no
no no
MEMO