Mains Connection - Gude GKS 108 Manual De Instrucciones Original

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68
Never reach into the danger area of the machine
when it is running. Chips and splinters must not be
removed while the machine is running.
The outside diameter and the thickness of your
accessory must be within the capacity rating of your
power tool.
Do not use accessories that require liquid coolants.
Using water or other liquid coolants may result in
electrocution or shock.
WARNING! Do not work with electric tools in condi-
tions with flammable liquids, gases or dust. Electric
tools produce sparks able to ignite dust or fumes.
WARNING! After switching off, the machine will not
be idle immediately. (After-running of the cut-off
wheel.) Allow the cut-off wheel to come to a stop
after switching off.
Ensure that the machine is always stable and secure
(e.g. fixed to a bench)
In the event of a blockage, switch off the machine
immediately.
Do not use protective equipment to transport or lift.

Mains Connection

Operation is only allowed with a safety switch against
stray current (RCD max. stray current of 30mA).
Connect only to single-phase AC system voltage as
indicated on the rating plate. It is also possible to
connect to sockets without an earthing contact as the
design conforms to safety class II.
Only plug-in when machine is switched off.
Inrush currents cause short-time voltage drops. Under
unfavourable power supply conditions, other equip-
ment may be affected. If the system impedance of the
power supply is lower than 0,2 Ohm, disturbances are
unlikely to occur.
Maintenance
Unplug the machine before any work
on it.
Carry out a visual inspection before switching the
appliance on.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
The motor's fan will draw the dust inside the housing
and excessive accumulation of powdered metal may
cause electrical hazards.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Use a soft brush.
Do not clean the plastics with solvents, flammable or
toxic fluids. For cleaning, use a damp cloth only. 
Apply environment-friendly oil to all moving parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
Caution! If the power cord of the appliance gets
damaged, it must be replaced by the manufacturer or
its customer service or a similarly qualified person to
avoid danger.
If necessary, a list of spare parts can be found at www.
guede.com.
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Important information for the customer
Please be sure to know that returning the product
in or after the warranty period must be made in
the original packaging.
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bureau-
cracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label.
Tel.:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
ENGLISH
19
Tabla de contenido
loading

Este manual también es adecuado para:

94077

Tabla de contenido