Cleaning And Maintenance - Vitrifrigo FG Serie Manual De Instalación

7.6 Cleaning and maintenance

Under the current regulations regarding health and safety, the operator
is responsible for the hygiene of food contact materials and must
maintain and clean the unit, preventing the bacteria formation.
Before performing any cleaning and / or maintenance operation,
disconnect the electrical supply to the refrigerator.
This important information is written on a plate placed on the back of
the product.
The outside of the refrigerator (plastic coated steel) can be washed
first with warm water and then rinsed in cold water and dried with a
soft cloth. Do not use abrasive products.
To clean the inside of the refrigerator, after removing any containers
of milk or similar liquids for human consumption, wipe with warm water
and if necessary, a little vinegar to remove any grease. Rinse with
clean water and dry with a soft cloth. Never use abrasive products,
detergents or soap.
It is also advisable to make sure that the air-cooled condenser of the
refrigerating unit at the back of the appliance is clean. If it is particularly
clogged with dust, this should be removed using a vacuum cleaner.
In case of a prolonged period of disuse, we advise you to disconnect
the refrigerator from the power supply, empty it completely, clean it
and leave the door slightly open to prevent the formation of mold
and/or unpleasant smells.
171064.UNI – rev. 04 EN