Vitrifrigo FG Serie Manual De Instalación página 37

ON/OFF switching
When the refrigerator is switched on, but in standby mode, the
thermostat's display shows alternatively OFF and the inside
temperature value.
To turn on the refrigerator, hold the button pushed for at least 3
seconds. You will see ON on the display and immediately after the
inside temperature value. Holding again the same button will switch
the refrigerator off.
NOTE: together with the refrigerator, also the cup warming shelf (if
present) will be turned ON
Once turned on, the fridge will start working, but it will take some time
(also depending on external conditions and temperature setting) to
reach the required internal temperature.
We recommend to store milk inside the refrigerator only when the
internal temperature has stabilized to the required value.
Temperature setting
To set the desired temperature, push the button until you see the
current set point value flashing, then adjust the value using the button
(to increase) and (to decrease); to store the new value press
again the button .
NOTE: To ensure that the milk is always maintained at temperature
allowed by the HACCP, the setpoint can be varied only within a
specific values range.
171064.UNI – rev. 04 EN