Idiomas disponibles
Idiomas disponibles
The device limits the maximum number of users authenticated at the same time for each mode, as specified
in Table 2.2. If this limit is exceeded, you will be asked if you want to disconnect any of the previously
authenticated users.
3.4 S
UPERVISION
The following section describes the web pages that can be accessed from the Supervision menu and the
functions that are available on these pages.
3.4.1 S
YNOPTIC
The Synoptic page (Figure 2.4) shows the most important information on the current status of the device.
The main element is a schematic representation of the different components that make up the device (AC
Input, Battery and Output) and their interconnection.
The lines connecting the components have 2 states:
Green: There is connectivity, and it shows the direction of the electrical current in that section
∗
Grey: No power and/or the section has been disconnected
∗
In section 4.1 Synoptic Scenarios of the annex, different screenshots have been added to show the different
states of the connection lines, depending on the status of the device.
The diagram also shows the states of the LEDs as they are on the device itself, and the state of the alarm
relays. Red indicates that the relay is closed.
www.premiumpsu.com
Powering Your Challenge
Table 2.2 - Authenticated user limit
Mode
Viewer
Administration
Figure 2.4 - Synoptic. No battery without temperature probe
Maximum number of users
4
1
EPS Series
Communications' Operation Manual
MA-5192B-1
07-10-2021
/
8
77
Capítulos
