Idiomas disponibles
Idiomas disponibles
3.4.3 M
EASURES
This page (Figure 2.6) shows values for the most significant measurements of the device.
The values are grouped into 3 blocks, depending on whether they affect the charger, battery or battery test
parameters. A brief description of all the parameters shown on this page is provided below.
CHARGER
•
State : State that the device is in (see Table 2.3)
o
Charger current: Current (A) delivered by the rectifier
o
Output voltage: Voltage (V) at the output of the device
o
Output current: Current (A) at the output of the device
o
o
Output power: Total power (W) at output
o
Temperature: Internal temperature (ºC) of the device
RECOVERY
•
Voltage: Battery voltage (V)
o
Current: Battery current (A). A negative value indicates that it is discharging
o
Power: Power (W) of the battery, both in terms of delivery and charging
o
Temperature: Temperature (ºC) measured by the probe
o
BATTERY TEST
•
Time to Next Battery Test: Remaining time before the next battery test
o
Battery discharge capacity: Measured battery capacity (mAh)
o
Discharge time: Discharge time (min) measured at last battery test
o
As on the previous pages, there is the option of auto-refreshing the information for the variables shown, at
different time intervals, as well as being able to force it to reload with the Refresh button.
Additionally, a history of the last battery test results is shown, as well as additional information related to
each test.
www.premiumpsu.com
Powering Your Challenge
Figure 2.6 - Measurements
EPS Series
Communications' Operation Manual
MA-5192B-1
07-10-2021
/
11
77
Capítulos
