Idiomas disponibles
Idiomas disponibles
To access this mode, it is necessary to use a PC and follow the steps below:
1. Check that the device is switched on ("Device ON" LED activated)
2. Press and hold the "Battery Reconnection" button for more than 10 seconds
3. Check that all the LEDs have started blinking
The recommended configuration for the PC is specified in Table 1.5.
The maximum time that this mode remains active is 20 minutes, however, it is necessary to exit this mode
once the desired actions have been performed.
In local mode, it will be accessed with the usernames specified in Table 1.6. One of them allows access in
viewer mode and the other in administration mode.
To exit this mode, it is necessary to follow the steps below:
1. Check that all the LEDs are blinking
2. Press and hold the "Battery Reconnection" button for more than 10 seconds
3. Verify that all LEDs have stopped blinking and are illuminated for normal operation
www.premiumpsu.com
Powering Your Challenge
Table 1.4 - Recommended PC configuration
Parameter
IP
Subnet mask
Browser
Table 1.5 - Usernames in local mode
Mode
Username
Viewer
search
Administration
*
*
Request credentials if needed
Communications' Operation Manual
Value
100.0.0.2
255.255.255.0
See Table 1.2
Password
search
EPS Series
MA-5192B-1
07-10-2021
/
5
77
Capítulos
