Idiomas disponibles
Idiomas disponibles
On-screen operating instructions
Focusing the camera lens
The lens of the camera must be focused properly on the projection
screen. Follow the steps described below :
K
highlight FOCUS THE LENS
forward or backward;
K
press ENTER to start up the process.
A pattern of vertical alternating green/black bars will be projected
onto the screen. A text box with the text "CAMERA FOCUS" and a
numeric bar scale (from 0 to 99) will be displayed during the
correction.
Initially, the value will be set to 50 and the length of black part of the
scale bar gives the visual indication. Due to the noise from the
source, the indicated value will swing constantly around 50.
To obtain a correctly focused camera turn the lens for a maximum
readout.
It is perfectly normal, when turning the lens, that the readout jumps
from '50' to '99' and to '50' again. Under such circumstances, just
continue turning the lens until a stabilised maximum readout is
obtained.
After finishing the correction, press EXIT to return to the IRIS SETUP
menu.
Centering the camera
The camera must be centered in the middle of the projection screen.
Follow the steps described below :
K
highlight CENTER CAMERA by pushing the control stick for-
ward or backward;
K
press ENTER to start up the process.
6
by pushing the control stick
IRIS
AUTOCONVERGENCE
IRIS SETUP
IRIS DIAGNOSTICS
IRIS SETUP
FOCUS THE LENS
CENTER CAMERA
TOUCH-UP OPTION :
ON SOURCE SWITCH : off
ON TIMER : off
-- h.-- min.
AUTO ALIGN OPTION :
AT POWERUP : off
é
ê
Select with
or
then <ENTER> ;
<TEXT> to program
timer;
<EXIT> to return
CAMERA
FO CUS
IRIS SETUP
FOCUS THE LENS
CENTER CAMERA
TOUCH-UP OPTION :
ON SOURCE SWITCH : off
ON TIMER : off
-- h.-- min.
AUTO ALIGN OPTION :
AT POWERUP : off
é
ê
Select with
or
then <ENTER> ;
<TEXT> to program
timer;
<EXIT> to return
2
5975477 IRIS
50
211196
Capítulos
