Idiomas disponibles
Idiomas disponibles
On-screen operating instructions
Align on current source
When 'ALIGN' is selected, the automatic convergence on the current
source will be carried out automatically, starting from the existing
settings.
Use this option when the state of convergence is close to the right
alignment.
By projecting alternately red and blue lines, 25 convergence areas
are aligned to the green pattern.
Follow the steps below to select :
K
highlight ' ALIGN' by pushing the control stick forward or back-
ward;
K
press Enter to start up the automatic convergence of the entire
screen.
If the process is successfully completed, the projector will return to
image display of the current source.
Align from midposition on current source
When 'ALIGN FROM MIDPOSITION' is selected, the automatic
convergence on the current source will be carried out automatically,
but starting from the midposition settings.
Use this option when the state of convergence is far away from the
right alignment.
By projecting alternately red and blue lines, 25 convergence win-
dows are aligned to the green pattern.
Follow the steps below to select :
K
highlight ' ALIGN FROM MIDPOSITION' by pushing the control
stick forward or backward;
K
press Enter to start up the automatic convergence of the entire
screen.
If the process is successfully completed, the projector will return to
normal image display of the current source.
On all sources
'O n all sources' includes also three options :
K
touch-up
K
align
K
align from midposition
The convergences will be adjusted on all sources of the projector, i.e.
all available setting blocks of the projector. The total number of
sources is displayed between brackets.
Touch-up on all sources
When 'TOUCH-UP' is selected, only the static convergence of all
sources will be adjusted automatically.
Follow the steps below to select :
K
highlight ' TOUCH-UP' by pushing the control stick forward or
backward;
K
press Enter to start up the static convergence.
The process will repeat for as many times as the number of the
sources until all sources are perfectly aligned.
If the process is successfully completed, the projector will return to
image display of the current source.
10
AUTOCONVERGENCE
ON CURREFNT SOURCE :
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
AUTOCONVERGENCE
é
ê
Select with
or
then <ENTER> ;
ON CURREFNT SOURCE :
<EXIT> to return
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
Status : Ready
é
ê
Select with
or
then <ENTER> ;
<EXIT> to return
AUTOCONVERGENCE
ON CURRENT SOURCE :
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
é
ê
Select with
or
AUTOCONVERGENCE
then <ENTER> ;
<EXIT> to return
ON CURRENT SOURCE :
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
Status : Ready
é
ê
Select with
or
then <ENTER> ;
<EXIT> to return
AUTOCONVERGENCE
ON CURREFNT SOURCE :
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
Status : Ready
é
ê
Select with
or
then <ENTER> ;
<EXIT> to return
AUTOCONVERGENCE
ON CURRENT SOURCE :
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
AUTOCONVERGENCE
ON CURRENT SOURCE :
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
Status : Ready
é
ê
Select with
or
then <ENTER> ;
<EXIT> to return
5975477 IRIS
2
211196
Capítulos
