Barco IRIS2 Manual De Ajuste página 16

During the Interface Test, the following messages will be displayed
one after another on the screen:
K
Ready and Config Test;
K
Ready and Config OK;
K
Config Ackn. Test;
K
Config Ackn. OK;
K
Full Config Test;
K
Full Config OK;
K
Interface Test OK.
In case of failures, the error message will be shown :
K
FAILED... Error 01; or
K
FAILED... Error 02; or
K
FAILED... Error 03.
During the Generic Test, the following messages will be displayed
one after another on the screen:
K
Config for Generic;
K
Config for Generic OK;
K
Chipselects Test;
K
Chipselects OK;
K
Addressability Test;
K
Addressability OK;
K
K Crystal and Reset Test;
Crystal and Reset OK;
K
Generic Test OK.
In case of failures, the error message will be shown :
K
FAILED... Error 11; or
K
FAILED... Error 12; or
K
FAILED... Error 13; or
K
FAILED... Error 14; or
K
FAILED... Error 15.
During the Sync Test, the following messages will be displayed one
after another on the screen:
K
Config for Sync;
K
Config for Sync OK;
K
Horizontal Sync Test;
K
Horizontal Sync OK;
K
Vertical Sync Test;
K
Vertical Sync OK;
K
Frame and Field Test;
K
Frame and Field OK;
K
Sync Test OK.
In case of failures, the error message will be shown :
K
K FAILED... Error 21; or
FAILED... Error 22; or
K
FAILED... Error 23; or
K
FAILED... Error 24; or
K
FAILED... Error 25; or
K
FAILED... Error 26; or
K
Sync Test Error 27
No Syncs found
Check Camera & Cabeling.
During the Ram Test, the following messages will be displayed one
after another on the screen:
K
Config for Ram;
K
Config for Ram OK;
K
Ram Data Lines Test;
K
Ram Data Lines OK;
K
Ram Address Lines Test;
K
Ram Address Lines OK;
K
Ram Full Content Test;
K
Ram Full Content OK;
K
Ram Test OK.
In case of failures, the error message will be shown :
2
5975477 IRIS 211196
On-screen operating instructions
K
FAILED... Error 31; or
K
FAILED... Error 32; or
K
FAILED... Error 33; or
K
FAILED... Error 34; or
If all the above tests are successful, the IRIS 2 DIAGNOSTICS menu
will be as follows :
Press EXIT to return to the IRIS menu.
When a 'failed' appears on the screen, contact an authorised service
technician to repair the failure.
IRIS 2 DIAGNOSTICS
Interface Test PASS
Generic Test PASS
Sync Test PASS
Ram Test PASS
IRIS 2
has been given
a clean bill of HEALTH.
13