Autoconvergence; Adjusting Screen Size; On Current Source; Interromper O Processo Da Convergência Automática - Barco IRIS2 Manual De Ajuste

AUTOCONVERGENCE

Adjusting screen size

When the projected image is larger than the screen size or the screen
has a frame around (i.e. projection impossible outside the frame), the
following blanking adjustments have to be done before starting the
automatic convergence :
K
when using a video source :
adjust the top, bottom, left and right blanking until the
whole projected video image is just still visible;
K
when using a screen with a frame around :
adjust the top, bottom, left and right blanking until the
whole projected image is just still visible.
In this way, the screen size is set correctly for ensuring a successful
convergence adjustment.
Note :
Please refer to the owner's manual of the projector for more explana-
tion about the blanking adjustments.
To enter the AUTOCONVERGENCE menu :
K
highlight ' AUTOCONVERGENCE' by pushing the control stick
forward or backward;
K
press Enter .
The AUTOCONVERGENCE menu allows the automatic conver-
gence either on the current connected source or on all sources (all
setting blocks of a projector).

On current source

The on current source includes three options :
K
touch-up
K
align
K
align from midposition
Touch-up on current source
When 'TOUCH-UP' is selected, only the static convergence of the
current connected source will be adjusted automatically. Follow the
steps below to select :
K
highlight ' TOUCH-UP' by pushing the control stick forward or
backward;
K
press Enter to start up the static convergence.
If the process is successfully completed, the projector will return to
image display of the current source.
2
5975477 IRIS 211196
On-screen operating instructions
è
Left
blanking
é
Bottom
blanking
AUTOCONVERGENCE
IRIS DIAGNOSTICS
AUTOCONVERGENCE
é ê
ON CURRENT SOURCE :
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
ALIGN FROM MIDPOSITION
Status : Ready
Select with
then <ENTER> ;
<EXIT> to return
Top
blanking
ê
ç
IRIS
IRIS SETUP
AUTOCONVERGENCE
ON CURRENT SOURCE :
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES : (10)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
Status : Ready
é
Select with or ê
then <ENTER> ;
<EXIT> to return
TOUCH-UP
ALIGN
TOUCH-UP
ALIGN
é
ê
or
Right
blanking
9