Gardena AssistCut Instrucciones De Empleo página 16

Keep the blade well maintained.
If the product got hot during operation, let it cool down
before storage.
Do not overload the product.
Always wear suitable clothing, protective gloves, and
stout shoes.
2. OPERATION
DANGER! Risk of physical injury!
Cut injury when the product starts
accidentally.
v Close the handles, lock the blade and
turn off the product before you transport
the product.
To charge the battery [ Fig. A / B ]:
CAUTION!
v Note the mains voltage! The voltage of
the power source must match the voltage
specified on the rating plate of the charger.
The 5 V power supply unit with USB socket is not
included. To use the AssistCut, you need a USB
power supply unit (5 V) with certified / country-
specific standard approvals.
To achieve the full charging speed and shortest
charging time, a 2 A power supply unit is recom-
mended. A USB power supply unit with lower
current will extend the charging time.
The battery is delivered partially charged. To ensure
the full performance of the battery, fully charge the
battery before the first use.
The AssistCut does not function while charging.
1. Open the dust cap
2. Plug the supplied USB-C charging cable into
the charging socket
3. Plug the USB-C charging cable into the power
supply unit.
4. Connect the power supply unit into a mains
socket.
The battery is charging. The green LEDs (
(L3)
and ) indicate the current charging progress.
When the battery is fully charged, all 3 LEDs
(L1) (L2) (L3)
( , and ) light green for 5 minutes.
5. Close the dust cap
When the battery is fully charged, the AssistCut
assists up to 1400 cuts.
16
12222-20.960.01.indb 16 12222-20.960.01.indb 16
(1)
.
(C)
.
(L1) (L2)
,
(1)
.
Do not work on slippy underground.
Be careful when working with the product on a ladder:
Danger of distraction could lead to a fall.
Battery charging indicator [ Fig. B ]:
Battery charging indicator during charging:
(L1)
100 % charged ,
(for 5 min.)
(L1)
67 – 99 % charged and
(L3)
flashes
(L1)
34 – 66 % charged illuminates,
(L1)
0 – 33 % charged flashes
Battery charging indicator during switch on
(for 5 sec.):
(L1)
67 – 100 % charged ,
(L1)
34 – 66 % charged and
(L1)
2 – 33 % charged illuminates
(L1)
1 % charged flashes
To switch on / off the AssistCut
[ Fig. C / D / E ]:
To switch on:
The product is provided with 2 safety devices
(2)
(ON / OFF switch and interlock
the product from being turned on by accident.
1. Grip the AssistCut at the front of the handles
and slide the ON / OFF switch
the ON position.
(Do not grip the AssistCut towards the back
of the handles or with finger(s) between the
handles).
(3)
2. Slide the interlock backwards to an unlocked
ß ß
position / .
P1 P2
The lower handle opens and the AssistCut is
ready for use.
To switch off:
1. Push the handles together and slide the inter-
(3)
lock forward to the locked position
2. Slide the ON / OFF switch
OFF position.
If the AssistCut is not used for 6 minutes, it
switches off automatically. To switch it on again,
(L2) (L3)
and illuminate
(L2)
illuminate,
(L2)
flashes
(L2) (L3)
and illuminate
(L2)
illuminate
(3)
) to prevent
(2)
backwards to
ß
.
P0
(2)
forward to the
21.03.22 08:06 21.03.22 08:06
t
B
T
o
s
F
s
m
m
g
i
2
[
T
3
T
4
T
T
c
1