Jocel JVA030658 Manual De Instrucciones página 24

safety screw.
• Place the Water Tank on the Humidifier Power Base.
• Connect the Mist Delivery Hose to the Mist Outlet and the Cap of Water Tank.
• Place the Cap of Water Tank on the Water Tank.
• Insert 2 x AAA size batteries (not supplied) into the remote control.
• The 40cm Pedestal Mist Fan is now ready to use.
OPERATING THE MIST FAN
• Remove the Water Tank from the Humidifier Power Base, turn it up-side down and you
will see a small plastic cover.
• Open the cover by turning it in a counter-clockwise direction.
• Fill the Water Tank with clean water.
• Close the plastic cover by tightening it in a clockwise direction. Note that there is a white
silicone ring which must not be loosened when filling the Water Tank with water.
• Place the Water Tank back onto the Humidifier Power Base.
• Plug the Mist Fan into the mains electrical supply. A "beep" sound will be heard indicating
that the Mist Fan is connected to the power.
• The "
" indicator light on the Main Control Panel will illuminate.
• Now the Mist Fan can be switched on either on its Main Control Panel or by the Remote
Control.
• Press the "
button to switch the Mist Fan on.
• By default, the Mist Fan will be switched ON in
− Low Speed Setting,
− Fixed Direction and
− Normal Wind mode setting
• After switching on the Mist Fan you can select different Speed Settings or the Wind Mode
that you prefer.
• The table below shows which switches perform which speed and wind functions:
24