Jocel JVA030658 Manual De Instrucciones página 22

ASSEMBLING YOUR FAN
• Unpack all the parts of the fan and remove the packaging.
• Insert the 2 Standing Bars into the Base with 2 screws in each bar. Note that each
Standing Bar has 2 holes on one side. This side with the holes must be installed into the
base. (Each Standing Bar comes with 2 screws already fitted. Unscrew the screws from
the Standing Bars and then insert the Standing Bars into the Base).
2 screws in each Standing Bar
• Place the weight under the Base then assemble with 4 screws provided.
• Ensure that the weight is correctly assembled as depicted in diagrams below.
• Assemble the main unit onto the 2 Standing Bars. Note that there are 2 screws on the
Main Unit which the installer must loosen before installing. After installing, these 2 screws
can be tightened.
INCORRECT
Remove screws first then attach
Standing Bars to the Base. Tighten the
screws after fixing Standing Bars to the
Base.
CORRECT
22