i-tec CATRIPLE4KDOCKPD Manual Del Usuario página 6

HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO MACBOOK)
1) Turn on the MacBook and connect the power adapter to the docking station.
2) Connect the docking station power adapter to the AC 110 V / 230 V network and press the ON
button.
3) Connect the USB-C cable to the USB-C port on the back panel of the docking station. For connection
to a USB-A port of your laptop / tablet, please use an adapter of USB-C to USB-A.
4) Connect the other end to the free USB 3.0 / USB-C port of your MacBook.
5) Subsequently, automatic port installations are started.
6) After the installation is complete, restart the MacBook.
The installed ports are displayed in Mac OS X as " USB-C Triple-4K Dock" in "About This Mac" → "System
Profiler" → "Hardware" → "USB".
INSTALLING DRIVERS IN OTHER OPERATING SYSTEMS
For Android, Chrome OS and Ubuntu, use the DisplayLink chipset drivers. These are available for download
on our website www.i-tec-europe.eu on the "Download" tab of this product or here:
http://www.displaylink.com/downloads.
CONNECT THE HDMI / DISPLAY PORT MONITOR
Use an HDMI / DP cable to connect the monitor to the docking station. During the installation of an
additional monitor, the laptop / tablet monitor may may blink, this is a normal state. The docking station
offers a graphic interface: 2x Display Port and 1x HDMI (the HDMI port is only available in case of
connection of the docking station to a USB-C port of your laptop). The docking station supports:
All manuals and user guides at all-guides.com
Driver installation in Mac OS X
Zobrazení dokovací stanice v macOS