Led Indicator; Button; Wps Button; Reset Button - Miele XKM 3200 WL LMD Instrucciones De Manejo

en - Guide to the appliance

WPS button

Reset button

42

LED indicator

The LED indicator (light emitting diode) provides status information
about the communication module.
LED
Lit up GREEN
Lit up YELLOW
Lit up RED
Off

Button

The button on the module has several functions.
The WPS button can be used to establish a WiFi connection between
the module and your router or repeater (WPS, WiFi, Protected Setup).
WPS-enabled routers or repeaters must be used.
The button on the module can be used to reset the module to the
factory default settings.
Press the button for approx. 5–9 seconds to restore the factory de-

fault settings.
Status
Connection to the network was successful. The
module is ready for operation.
Network is configured but there is no connec-
tion to the network.
The module is not configured.
Power is not being supplied to the module.
Check that the module is in the correct position
in the module slot.