Daga cálido confort Instrucciones De Uso página 13

ENGLISH
Next, make the bed as usual. while the heated mattress pad is con-
nected, avoid putting suitcases or other heavy objects on the bed and
also avoid simultaneous use of other sources of heat such as hot wa-
ter bottles, electric heating pads or other similar objects.
In order to take care of your product, make sure the controller switch
is in the "0" position before turning it on or unplugging it.
To turn it on, use the controller and turn the side On/Off switch to the
"I" position.
Immediately, the electronic controller will do to quick check to de-
tect possible anomalies indicated on the panel through to light scan.
Then, the default work mode will be configured: Light 1 on (lowest
heat setting) and Free mode (12h, no pre-set time light is on). The
heated mattress pad is now on.
Proceed to the adjustment of the desired heat setting, choosing be-
tween the 4 possible settings, pressing the key as many times as
you like.
On the controller, during the Autostop mode, only the red light indi-
cating the chosen heat setting is on while all the others remain off.
To start using your heated mattress pad, we recommend that you put
the regulator at the maximum position for 20 min. before lying down
so you can enjoy the pleasurable feeling of comfort. For prolonged use
of the product, it is advisable to use the lowest heat setting (position 1).
Also, it is not advisable to use the maximum heat setting (position 4)
for more than 1h non-stop.
Select an operating time by pressing the key as many times as
you like.
Once the operating time or autostop has completed, whether it be
preset (2h, 6h, 8h) or by default (Autostop 12h), the heated mat-
tress pad will disconnect and all the temperature lights on the control
panel will turn off and only the green preset operation time indicator
light or yellow 12h autostop light will turn back on.
Press any key to immediately return to the Free mode.
To turn off the heated mattress pad, turn the side On/Off switch to
the "0" position.
When putting the heated mattress pad away, let it cool off and do not
stack things on top of it.
The CMN, CMN2, CMNX, CMNX2 models come with a double control-
ler, allowing individual temperature control on both sides of the bed.
For the rest of models, a single controller controls the overall surface
temperature of the heated mattress pad.
13
CalientaCamas-ALL.indb 13 15/03/10 17:06