Multi-use wet pad
Velcro
Attachable
pad
20
English
Spin disk
Single-use wet pad
<Front>
<Back>
2
1
Water Tank
Wet Brush
Use to clean a floor with a wet pad (wood and
linoleum).
❇ ❇ The Wet Brush does not have a dust suction
function.
Using the multi-use wet pad
• When attaching the wet pad, make sure the
pad is in the center of the spin disk.
Using the single-use wet pad
• Attach the single-use wet pad to the front
side (Velcro side) of the attachable pad on
the spin disk.
– If you use the single-use wet pad without
the attachable pad, cleaning performance
can be degraded.
• After using the single-use wet pad, discard
the pad.
Detaching or attaching the Water Tank
• Press the lower part of the Water Tank to
detach.
• When attaching the Water Tank, insert the
front end first.
NOTE
• Do not use underground or polluted water.
• When using for the first time, the air in
the pump and the tube may cause the Wet
Brush to delay spraying water. Press the
water spray (+) button repeatedly.
Adjusting the pipe length
Press the button at the rear of the adjustable
pipe to adjust the length of the pipe in
3 steps.