3M PRO-PROTECT Manual Del Usuario página 20

HARD HAT ATTACHMENT
PRO-COMMS ELECTRONIC HEARING PROTECTION
8
8. Align the hard hat adaptor tabs with the hard
hat mounting slots.
10
10. To do so, first remove the original slider (turn 90
degrees and pull), and then place boom microphone
slider on by turning slider 90 degrees and pushing
onto fork. Once in place, the hard hat with adaptors
and boom microphone should look like above image.
20 English
9
9. Press the hard hat adaptor down into the hard
hat slots until the adaptor clicks in place.
Once hard hat adapters are attached to hard hat,
you will need to attach the boom microphone and
slider to the left front fork.
11
11. Reattach the cups to the headband (make sure to
attach Left and Right cups to their respective
sides of the hard hat - look inside cup for "L" and
"R" for reference). Rotate the cups 90 degrees
and push each side of the fork until hinge locks
onto the fork. Repeat for each fork.