3M PRO-PROTECT Manual Del Usuario página 18

BASIC OPERATIONS
PRO-COMMS ELECTRONIC HEARING PROTECTION
Please note – in order to attach
3M™ Pro-Comms to a hard hat, you
will need to use the hard hat earmuff
adapters, 3M™ PELTOR™ Hard Hat Guide
Arms Assembly, part number P3EG-PK.
2
2. Headband with end caps removed.
18 English
1
1. Grab headband near the cable on the inside
and outside of the end cap. Lift up to pop off the
end cap from the mounting plate on the
headband. Repeat on the other side.
3
3. Once end caps are removed, dislodge the
headband cable from the headband channel by
grasping the cable near the end cap, and start to
pull slowly until the headband cable is free.