Kenmore 137.23671310 Manual De Uso Y Cuidado página 9

CAUTION
SPIDER ALERT!
clean. A venturi burner tube has a narrow area in which
spiders tend to build nests.
If you notice that your grill is getting hard to light or that the
can damage your grill and even cause injury.
burner and venturi assembly should be removed from the grill
and cleaned before use whenever the grill has been idle for
Store in dry location.
well-ventilated space and out of reach of children. Cover grill if stored outdoors. Choose from a variety of grill
Assembly" instructions before starting grill.
All manuals and user guides at all-guides.com
Cleaning the Burner Assembly
Follow these instructions to clean and/or replace parts of burner
assembly or if you have trouble igniting grill.
3. Remove screws and nuts from rear of burners
4. Remove screw and nut from igniter pin and put igniter pin on
the side.
We suggest three ways to clean the burner tubes. Use the one
easiest for you.
several times.
tube several times.
Wear eye protection: Use an air hose to force air into the
6. Wire brush entire outer surface of burner to remove food
residue and dirt.
7.
paper clip.
8.
are found replace burner.
VERY IMPORTANT: Burner tubes must reengage
Carefully replace burners.
9.
10.
11. Reposition igniter pins and attach to burners. Replace heat
23671-46477279 9