Makita LS1214 Manual De Instrucciones página 14

ENGLISH
1 Stopper pin
2 Bolt
3 Blade guard
4 Knob
5 Kerf board
6 Saw blade
7 Blade teeth
8 Left bevel cut
9 Straight cut
10 Right bevel cut
11 Adjusting bolt
12 Turn base
13 Top surface of turn base
14 Periphery of blade
15 Guide fence
16 Adjusting screw
17 Stopper arm
18 Lock lever
19 Grip
20 Pointer
21 Miter scale
22 Lever
23 Arm
24 Bevel scale
25 Lock-off button
26 Switch trigger
27 Handle
28 Light
SPECIFICATIONS
Model
Blade diameter ................................................................................................................................................... 305 mm
Hole diameter .....................................................European countries: 30 mm, other than European countries: 25.4 mm
Max. Miter angle.................................................................................................................................. Left 47°, Right 52°
Max. Bevel angle ..................................................................................................................................Left and Right 45°
Max. cutting capacities (H x W)
Miter angle
0°
45° (left and right)
52° (right)
(Note)
* mark indicates that a wood facing with the following thickness is used.
45° (left and right)
–1
No load speed (min ) ............................................................................................................................................ 3,200
Dimensions (L x W x H) ..................................................................................................... 723 mm x 520 mm x 696 mm
Net weight ...............................................................................................................................................................23 kg
14
Explanation of general view
29 Light switch
30 Socket wrench
31 Wrench holder
32 Center cover
33 Hex bolt
34 Blade case
35 Arrow
36 Shaft lock
37 Inner flange
38 Spindle
39 Ring
40 Outer flange
41 Hex bolt (left handed)
42 Dust nozzle
43 Dust bag
44 Fastener
45 Support
46 Turn base
47 Sub-fence
48 Sub-fence R
49 Screws
50 Vise knob
51 Screw
52 Vise arm
53 Vise rod
54 Vise plate
55 Vise nut
56 Vise knob
45° (left)
*71mm x 260mm
66 mm x 305 mm
(left) *71mm x155 mm
66 mm x 170 mm
(right) *71 mm x 175 mm
66 mm x 215 mm
–
Miter angle
0°
52° (right)
57 Holder
58 Spacer block
59 Vise
60 Aluminum extrusion
61 Horizontal vise
62 Hole
63 Over 15 mm
64 Over 540 mm
65 Cut grooves with blade
66 Hex bolts
67 Triangular rule
68 Pointers
69 Arm holder
70 Right 45° bevel angle
adjusting bolt
71 Left 45° bevel angle
adjusting bolt
72 Hex lock nut
73 Kerf block
74 Pull out
75 Push
76 Lamp box
77 Fluorescent tube
78 Limit mark
79 Brush holder cap
80 Screwdriver
81 Rod
Bevel angle
0°
*120 mm x 270 mm
115 mm x 308 mm
*120 mm x 185 mm
115 mm x 218 mm
*120 mm x 160 mm
115 mm x 185 mm
Thickness of wood
20 mm
15 mm
15 mm
LS1214/LS1214F
45° (right)
*50 mm x 260 mm
45 mm x 305 mm
*50 mm x 175 mm
45 mm x 215 mm
–