Safety Regulations - GGP ITALY CR 430 Serie Manual De Instrucciones

EN

SAFETY REGULATIONS

TO BE OBSERVED SCRUPULOUSLY
IMPORTANT - READ CAREFULLY BEFORE USING THE MACHINE
KEEP FOR FUTURE REFERENCE
DESCRIPTION OF THE MACHINE AND ITS RANGE OF USE
This machine is a garden equipment, namely a pedestrian controlled lawnmower.
The machine is essentially composed of a motor which drives a blade enclosed in a
casing, equipped with wheels and a handle. The operator is able to operate the ma-
chine and use the main controls, always staying behind the handle at a safe distance
from the rotating blade. If the operator leaves the machine, the motor and blade will
stop within a few seconds.
Intended use
This machine was designed and manufactured for cutting (and collecting) grass in
gardens and grassy areas, in areas in proportion to its cutting capacity, done by a
pedestrian operator. The presence of accessories or specific devices can prevent
cut grass from being collected or produce a mulching effect, depositing cut grass
on the ground.
Improper use
Any other usage may be hazardous and harm persons and/or damage things. Exam-
ples of improper use may include, but are not limited to:
– transporting persons, children or animals on the machine;
– letting oneself be transported by the machine;
– using the machine to tow or push loads;
– using the machine for leaf or debris collection;
– using the machine to trim hedges, or for cutting vegetation other than grass;
– use of the machine by more than one person;
– using the blades on surfaces other than grass.
A) TRAINING
1) Read the instructions carefully. Become familiar with the controls and the proper
use of the lawnmower. Learn how to stop the motor quickly.
2) Never allow children or persons unfamiliar with these instructions to use the lawn-
mower. Local regulations can restrict the minimum age of the operator.
3) Never use the lawnmower:
– w hen people, especially children or pets are nearby;
– i f the operator has taken medicine or substances that may impair his ability to react
and be attentive.
4) Bear in mind that the operator or user is responsible for accidents or unexpected
events occurring to other people or their property.
B) PRELIMINARY OPERATIONS
1) While mowing, always wear sturdy footwear and long trousers. Do not operate the
lawnmower when barefoot or wearing open sandals. Avoid wearing clothing that is
loose fitting or has hanging cords or ties.
2) Thoroughly inspect the entire work area and remove anything that could be thrown
by the machine or damage the cutting unit or motor (stones, branches, iron wire,
bones, etc.).
3) Before use, always inspect generally and in particular to see that the blade, screws
and cutting unit are not worn or damaged. Replace damaged or worn blades and
screws in their entirety to preserve balance. Replace damaged or unreadable labels.
4) Before use check the supply and extension cord for signs of damage or aging. If the
cord becomes damaged during use, disconnect the cord from the supply immediately.
DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use
the machine if the cord is damaged or worn.
C) DURING USE
1) Mow only in daylight or good artificial light.
2) Avoid mowing wet grass or when it is raining.
3) Make sure you have a steady foothold on slopes.
4) Never run, always walk; do not let the lawnmower pull you.
5) Always mow transversely on slopes and never up and down.
6) Be extremely carefully when changing directions on slopes.
7) Never mow on overly steep slopes.
8) Be extremely careful when pull the lawnmower toward you.
9) Immobilise the blade if the lawnmower must be inclined for transport, when moving
over surfaces other than grass and when the lawnmower is transported from or to an
area that must be cut.
10) Never operate the lawnmower with damaged guards or without the grass-catcher
or discharge guards.
11) Start up the motor carefully according to the instructions, keeping feet away
from the blade.
12) Do not incline the lawnmower when starting the motor, unless necessary for start
up. In this event, do not incline it more than is absolutely necessary and only lift the
part that is far from the operator. Always ensure that both hands are in the working
position before lowering the lawnmower again.
13) Do not start the machine when standing in front of the discharge opening.
14) Never place your hands and feet near or under rotating parts. Keep away from
the discharge opening.
15) Do not lift or transport the lawnmower when the motor is running.
16) Stop the machine and remove plug from the socket. Make sure that all moving
parts have come to a complete stop:
– when transporting the machine;
– whenever you leave the machine.
– before clearing blockages or unclogging chute;
– before checking, cleaning or working on the machine;
– after striking a foreign object. Inspect the machine for damage and make repairs
before restarting and operating the machine;
If the machine starts to vibrate abnormally (check immediately):
24
All manuals and user guides at all-guides.com
– inspect for damage;
– replace or repair any damaged parts at a specialised centre;
– check for and tighten any loose parts.
17) Stop the motor:
– whenever you remove or reattach the grass-catcher;
– whenever you adjust the cutting height.
18) When mowing, always keep a safe distance from the rotary blade, given by the
length of the handle.
19) WARNING - If something breaks or an accident occurs during mowing, turn off
the motor immediately and move the machine away to prevent further damage; if an
accident occurs with injuries or third parties are injured, carry out the first aid measures
most suitable for the situation immediately and contact the medical authorities for any
necessary health care. Carefully remove any debris that might cause damage or harm
persons or animals should it not be seen.
D) MAINTENANCE AND STORAGE
1) Keep all nuts and screws tight to be sure the machine is always in safe working
condition. Routine maintenance is essential for safety and for maintaining a high
performance level.
2) Check the discharge guards and the grass-catcher frequently for wear or dete-
rioration.
3) Be careful during adjustment of the machine to prevent entrapment of the fingers
between moving blades and fixed parts of the machine.
4) Always allow the machine to cool down before storing.
5) When servicing the blades be aware that, even though the power sources is
switched off, the blades can still be moved.
6) For safety reasons, never use the machine when it has worn or damaged parts.
Parts must be replaced and not repaired. Use original spare parts. Parts that are not
of the same quality can damage the equipment and impair your safety.
7) To reduce fire hazards, keep lawnmower and in particular, the motor, free of
grass, leaves, or excessive grease. Never leave containers with cut grass inside a
storage area.
E) GENERAL PRECAUTIONS
1) Before each use, check the machine for damage. Any repairs must be done at a
specialised centre. Turn off the machine and disconnect the plug from the socket if the
machine begins to vibrate abnormally, then contact a specialised centre for inspection.
2) Keep both hands on the grip during start up.
3) Parts subject to wear must only be replaced at a specialised centre.
4) Never use the machine if the power cable or extension cable are damaged or worn.
5) Never connect a damaged cable to a mains socket and never touch a damaged
cable that is connected to the mains socket. Damaged or deteriorated cables may
cause contact with energised parts.
6) Do not touch the blade until the machine is disconnected from the mains socket and
that the blade is completely still.
7) Keep the extension cable away from the blade. The blade can damage the cable
and cause contact with energised parts.
8) Carefully read the instructions for using the machine safely.
9) Power up the machine using a differential switch (RCD - Residual Current Device)
with a tripping current of max. 30 mA.
10) If the machine's power cable is damaged, it can only be replaced with an original
spare part by your dealer or an authorised service centre.
F) ADDITIONAL WARNINGS
1) The permanent connection of any electrical equipment to the mains of a building
must be installed by a qualified electrician in conformity with the regulations in force.
Incorrect wiring can cause serious injury and even death.
2) WARNING: DANGER! Moisture and electricity are not compatible:
– always handle and connect electric cables in dry conditions;
– never allow electric sockets or cables to contact wet areas (puddles or wet grass);
– c onnections between cables and sockets must always be watertight. Only use
3) The quality of the extension leads must be no less than H07RN-F or H07VV-F,
with a minimum section of 1.5 mm
4) Attach the extension lead to the cable fastener before starting the machine.
5) Before starting work, fit the exit guards (grass-catcher or discharge guards).
6) Never run the lawnmower over the electric cable. While mowing, always drag the
cable behind the lawnmower on the side where grass has already been cut. Use the
cable fastener to prevent the cable from disconnecting accidentally as indicated in this
manual. Make sure it is connected to the socket without being forced.
7) Never use the power cable to pull the lawnmower or pull the cable to remove the
plug. Do not expose the cable to sources of heat, or let it come into contact with oil,
solvents and sharp objects.
8) Wear work gloves for disassembling and reassembling blades.
9) Keep the blade balanced during sharpening. All work on the blade (disassembly,
sharpening, balancing, reassembly and/or replacing) are demanding jobs that require
special skills as well as special tools. For safety reasons, these jobs are best carried
out at a specialised centre.
G) TRANSPORTATION AND HANDLING
1) Whenever the machine is to be handled, lifted, transported or tilted you must:
– w ear sturdy work gloves;
– g rasp the machine at the points that offer a safe grip, taking account of the weight
– use an appropriate number of people for the weight of the machine and the char-
2) During transport, fasten the machine securely with cables or chains.
extension leads with intact, watertight and approved sockets sold on the market.
and a recommended maximum length of 25 m.
2
and its distribution.
acteristics of the vehicle or the place where it must be placed or collected.