Reggiani REVIOS Serie Instrucciones Para La Instalación página 12

REVIOS | ENG |
www.reggiani.net
• For LEDs:
The projectors are supplied with the LED
already installed.
Remove the blue protective film before
switching on the LED (fig.5).
5
Do not touch the LED; in particular, avoid
the use of pointed tools which could
otherwise damage internal connections.
The reflector twist-lock fixing system
fig.5
(present on most products equipped

with the LED) allows the adjustment of the
beam from narrow to wide or Wall Washer
Mira (refer to the catalogue or access the
product datasheet on the website:
5
www.reggiani.net/reference

corresponding accessory).
Arrange the retainer tabs in the optical
compartment. Press and turn the refl ector
clockwise until it snaps into place fig.5
The Wall Washer Mira refl ectors enable
additional adjustment of the elliptical
beam by rotating the shield. There is no
provision for replacing the light source on
LED projectors. If any malfunction occurs,
contact Reggiani Spa Illuminazione to
replace the luminare.
5
C
012
for the
.
