Control Panel And Features; Power Button - Kenmore 110.6813 410 Serie Manual De Uso Y Cuidado

STEAM MODEL
NON-STEAM MODEL

POWER BUTTON

1
Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
CYCLE KNOB
2
Use your cycle knob to select available cycles on your dryer.
Turn the knob to select a cycle for your laundry load. See
"Cycle Guide" for detailed descriptions of cycles.
Timed Cycles
Will run the dryer for the specified time on the control.
On models with a selectable temperature button, you
may choose a setting based on the fabrics in your load.
Drying time and temperature will vary depending on your
dryer model.
Sensing Cycles
Sensing cycles give the best drying in the shortest time.
Drying time will vary based on fabric type, load size,
and dryness setting.
LED DISPLAY AND SETTINGS
3
When you select a cycle, its default settings will light up and
the Estimated Time Remaining (for Sensing Cycles) or actual
time remaining (for Timed Cycles) will be displayed.
Touch the setting names next to the display to adjust settings.
See "Cycle Guide" for available settings on each cycle. Not
all settings are available with all cycles.
Dry Temp
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the higher
setting. See "Cycle Guide."
All manuals and user guides at all-guides.com

CONTROL PANEL AND FEATURES

1 2
1 2
Not all features and options are available on all models.
Appearance may vary.
3
4
7
3
4
7
Dry Level
You may adjust the Dry Level on Sensing Cycles (except
for the Sanitize cycle), if desired.
NOTE: Dry Level is for use with Sensing Cycles only.
Cycle Signal
The Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the
end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Guard™ option is selected and
the Cycle Signal is on, the tone will sound at 15 minutes,
30 minutes, and at the end of Wrinkle Guard™.
Time Adjust for Timed Cycles Only
4
Use "+" and "–" with Timed Cycles to increase or decrease
the length of a Timed Dry or Express cycle.
OPTIONS
5
Use to select available options for your dryer. Not all cycles
and options are available on all models.
Energy Saver option
Activate the ENERGY SAVER setting to increase your
energy savings. This setting uses a lower heat level and
extends cycle time. Turn on for optimal energy savings.
Turn off for optimal cycle times. ENERGY SAVER will
default on for NORMAL.
NOTE: Energy savings is not available on all cycles, and
may vary across loads and cycles.
5 6
5 6
5