Becken BDW1965N IX Manual De Instalación página 36

Cleaning the Spray Arms
It is necessary to clean the spray arms
regularly as hard water chemicals will
clog the spray arm jets and bearings.
To remove the upper spray arm,
unscrew the nut clockwise over
the spray arm and remove it.
To remove the lower spray arm,
undock the supports and remove it.
Wash the arms in soapy and warm
water and use a soft brush to clean
the jets. Replace them after rinsing
them thoroughly.
Caring for the dishwasher
To clean the control panel, use a lightly dampened cloth then dry it
thoroughly.
To clean the exterior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part
of the dishwasher.
Protect Against Freezing
If your dishwasher is left in an unheated location during the winter,
ask a service technical to:
1. Cut off electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water inlet pipe from
the water valve.
3. Drain the water from the inlet pipe and water valve (you can use a
pan to catch the water).
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter in the tub and the bottom and use a sponge to
collect water in the sump.
36