Becken BDW1965N IX Manual De Instalación página 15

EN
Prior Using for the First Time
Before using your dishwasher for the first time, refer to the following
items:
A. Set the water softener
B. Fill the salt container
C. Fill the rinse aid dispenser
D. Detergent
A. Set the water softener
The water softener is designed to remove minerals and salts from
the water, which would have a detrimental or adverse effect on the
dishwasher's operation. The higher the content of these minerals
and salts, the harder the water is. The softener should be adjusted
according to your area's water hardness. Your local Water Authority can
advise you on the water hardness in your area.
Setting
The amount of salt dispensed can be set from H0 to H7.
Salt is not required at the set value H0.
1. Find out about the water hardness in your area. Your water utility
company will help you with this.
2. Set value can be found in the water hardness table.
3. Close the door.
4. Switch on "Power" switch.
5. Hold down " Delay" button and then press "Programme" button for 5
seconds.
The buzzer rings one time and "H..." flashes on the digital display
(factory setting is H4).
15
Dishwasher | Lavavajillas | Máquina de Lavar Loiça