Becken BDW1965N IX Manual De Instalación página 35

EN
Step 1: Rotate the coarse filter counter-clockwise and lift it up.
Step 2: Lift the flat filter.
Note: If operate from step 1 to step 2, the filter system will be removed;
while operate from step 2 to step 1, the filter system will be installed.
Filter assembly
For best performance and results, the filter assembly must be cleaned.
The filter efficiently removes food particles from the wash water,
allowing it to be recirculated during the cycle. For this reason, it is a
good idea to remove the larger food particles trapped in the filter after
each washing programme by rinsing the semi-circular filter and cup
under running water. To remove the filter assembly, pull the cup handle
upwards. The entire filter assembly should be cleaned once a week. To
clean the coarse filter and the micro filter, use a cleaning brush. Then,
reassemble the filter parts as shown in the figures above and reinsert
the entire assembly in the dishwasher, positioning them in place and
pressing downward. The dishwasher must never be used without the
filters. Improper replacement of the filter may reduce the performance
level of the appliance and damage dishes and utensils.
WARNING!
Never run the dishwasher without the filters in place. When cleaning
the filters, don't hit them. Otherwise, the filters could be contorted and
the performance of dishwasher could be debased.
35
Dishwasher | Lavavajillas | Máquina de Lavar Loiça