Before Use; Operation - cecotec Bamba PrecisionCare Wet&Dry Manual De Instrucciones

ENGLISH

3. BEFORE USE

• Take the product out of the box.
• Remove all packaging materials. Keep the original box.
• Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
• Fully charge the device for 90 minutes approx.
• Oil the device's blades before the first use.

4. OPERATION

• Turn on the clipper with the on/off button.
Note: An audible click may sometimes be heard when switching the equipment on, it is a result
of the drive unit switching on. This is completely normal.
CHARGE
• Turn the clipper off before connecting it to the charger and the power supply.
• During charge, the plug icon will turn on red and the battery percentage will be displayed
accordingly: 20-40-60-80-100.
• When fully charged, it will display 10 in white.
• The plug icon will flash in red when battery is low.
• For a quick-charge, charge it 5 minutes and operate it for 3-5 minutes.
LOCK
The clipper includes a safety lock system.
• Press and hold the power button for 3 seconds to lock the device. The lock icon will turn
on white.
• Press and hold the power button for 3 seconds to un lock the device. The lock icon will
disappear from the display.
• The device will also be unlocked when connected to the charger.
HOW TO ADJUST THE CUTTING LENGTH
1. Blade-adjustment switch:
The cutting length can be adjusted through the blade-adjustment switch during operation or
before the appliance is switched on.
Slide the switch to the right for shorter haircuts, or slide it to the left for longer-length haircuts
(0.5 mm, 1 mm, 1.5 mm, 2 mm).
26 PRECISIONCARE WET&DRY