Parts And Components; Before Use; Operation - cecotec Bamba PrecisionCare All Drive Manual De Instrucciones

ENGLISH

2. PARTS AND COMPONENTS

4
1
2
5
3
PRECISIONCARE ALL DRIVE
14
6
8
1. Cut length dial
2. On/off switch
3. Charging indicator
4. Blade head
7
5. Comb attachment (1-10 mm)
6. Cleaning brush
7. Lubricating oil bottle
8. Power adaptor

3. BEFORE USE

1. Take the product out of the box.
2. Remove all packaging materials. Keep the original box.
3. Make sure all the components are included and in good conditions, otherwise,
contact immediately the official Technical Support Service of Cecotec.
4. Oil the device's blades before the first use.
WARNING: Switch OFF the device before replacing or changing the attachments.

4. OPERATION

Installing the blade head
1. Make sure the device is turned OFF before installing or manipulating the blade
head.
2. Align both sides of the of the blade head with the slots on the main body of
the device.
3. Insert the blade head into the main body as shown below.
Removing the blade head
1. Make sure the device is turned OFF before installing or manipulating the blade
head.
2. Hold the device firmly and press upwards against the arrow of the blade head.
3. Carefully detach the blade head from the main body.
Installing the comb attachment
1. Make sure the device is turned OFF before installing the comb attachment.
2. Align the cut length dial (1) to indicator "10".
3. Mount the comb attachment to the main body as shown below
4. You may adjust the cut length by turning the cut length dial (1).
PRECISIONCARE ALL DRIVE
ENGLISH
15