Copyright; Before You Start; Remote Control / Inserting The Battery - Silvercrest SHLF 2000 C1 Manual Del Usuario

Ocultar thumbs Ver también para SHLF 2000 C1:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
SilverCrest SHLF 2000 C1
 Batteries must not be recharged, dismantled, discarded of in
fire or short-circuited.
 Remove empty batteries immediately to prevent leaks.
 If battery acid has leaked out, avoid contact with eyes, skin
and mucus membranes. In the event of contact with acid,
rinse the affected parts immediately with plenty of clean
water and seek medical attention.
WARNING about property damage
 Do not attempt to swivel the unit by hand. This could damage
the motor.
 Do not use any abrasive or astringent detergents.

6. Copyright

All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the
author is strictly forbidden. This also applies to any commercial use of the contents and information.
All texts and diagrams are up-to-date as of the date of printing.

7. Before you start

Please unpack the fan heater and remove all packaging material. Inspect the fan heater for any
damage. If the fan heater is damaged, do not use it.

7.1 Remote control / inserting the battery

The remote control (19) supplied can be stored in the remote control compartment (7) of the fan
heater when not in use. You can operate the fan heater in the same way from the control panel (1)
of the fan heater or using the remote control (19). The buttons on the control panel (1) and on the
remote control (19) have the same labels and the same function.
The battery has already been fitted into the remote control (19). Remove the plastic strip
sticking out of the battery compartment in order to activate the battery.
34 - English
Tabla de contenido
loading

Este manual también es adecuado para:

304245

Tabla de contenido