Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5 Operation
5.2
Setting menus and parameters
setting to date
Holiday programming
for cpl. System
Period of
time
1
>06.01.08
08.01.08
2
14.01.08
30.01.08
Room Temp. setpoint
>Set start day
Basic data
Date
>21.04.08
Day of
week
Mo
Time
09:35
>Set day
Basic data
Date
21.04.08
Day of
week
>Mon
Time
09:35
>Set weekday
5.3
Description of the controller
The heating engineer will have set all the operating pa-
rameters to preset values during commissioning, so that
the heat pump can function optimally. However, you can
individually set and adapt the operating modes and
functions afterwards.
12
All manuals and user guides at all-guides.com
select menu:
6
– Turn the
dial: Select
menu e.g. from menu 6
to 7.
12°C
Select parameter:
7
•
Turn the
dial: select the
parameter to be modified,
e.g. from line 1 Day to line
2 Weekday (turn dial
through 3 further index
steps in this case).
Modify parameter weekday
7
from Monday to Tuesday:
– Push the
dial:
Select parameter.
– Turn the
dial:
Modify parameter.
– Push the
dial:
Accept modification.
5.3.1
The controller can control the following system circuits:
– a heating circuit.
– an indirectly heated hot water storage tank.
– a hot water circulation pump.
– a buffer circuit.
In order to extend the system a buffer circuit can be
used to connect up to six additional mixer circuit mod-
ules VR 60 (accessories) each with two mixer circuits.
The controller on the operating panel of the heat pump
is used to programme the mixer circuits.
In order to operate under comfortable conditions you
can connect the remote control units VR 90 for the first
eight heating circuits.
modified setting
Basic data
Date
>21.04.08
Day of
week
Mo
Time
09:35
>Set day
Basic data
Date
21.04.08
Day of
week
>Mon
Time
09:35
>Set weekday
Basic data
Date
21.04.08
Day of
week
>Tues
Time
09:35
>Set weekday
Possible system circuits
Operating Manual geoTHERM VWS/VWW 0020051578_01
7
7
7
Capítulos
Tabla de contenido
