Vaillant geoTHERM VWS Serie Instrucciones De Uso página 18

Ocultar thumbs Ver también para geoTHERM VWS Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

5 Operation
Display shown
Mon. 21.04.08
Current flow temp.
CH pressure
Brine pressure
Heating only comp.
Warning message
Warning message
Table 5.1 Settable parameters in the operator level (contd.)
16
All manuals and user guides at all-guides.com
Description
Energy input display
Shows the energy extracted from the environment for each of the
12 months of the current year (black bar). White-filled bars represent
the future months of the year; the height of the bar corresponds to
the yield for the month in the previous year (comparison possible).
On commissioning, the height of the bars is zero for all months, as no
information is available yet.
The scaling (in the example, 4000 kWh) adapts automatically to the
month's highest value.
Top right the total of the environmental yield since commissioning is
displayed (in the example: 13628 kWh).
Day, date, time as well as flow temperature, heating system pressure
16:49
1
and heat source pressure are displayed.
28 °C
Current flow temp: Current flow temperature in the unit.
1.2 bar
Heating system pressure: Pressure sensor heating circuit.
1.4 bar
Pressure heat source: Heat source pressure (Pressure sensor for
heat source circuit; brine pressure)
Heating only comp.: this status message provides information on the
current operating status. The following are possible:
Heating only comp.
Heating comp & ZH
CH: ZH only
CH:Comp&aux off
WW:Comp&aux off
WW: Comp only
WW: ZH only
Peak Rate: WW
Peak Rate: Stand-by
Acceleration mode
Frost prot. Heating
Frost prot. Cylind.
Legionella protect.
Automatic pump spin
Floor drying
Venting mode
Fault shutdown: heating
Error shutdown: heating
Fault shutdown: DHW
Error shutdown: DHW
Malfunction
Blocking error
Operation interlock
CH Comp overrun
WW Comp overrun
Cooling & WW
CH return too high
Under critical operating conditions a warning message is displayed in
both lower display lines. These lines are empty when the operating
conditions are normal.
Operating Manual geoTHERM VWS/VWW 0020051578_01

Capítulos

Tabla de contenido
loading

Tabla de contenido